Application of your vinyl:
Step 1: Clean the area thoroughly with rubbing alcohol or soap and water. Do not use cleaning products because they leave a residue behind that will prevent the vinyl from adhering well.
Step 2: Prepare the vinyl for application. Firmly rub on top of the transfer paper with your fingers or the edge of a bank card. This removes the air bubble and ensures the vinyl clings to the transfer tape.
Step 3: Peel the white backing paper away from the transfer paper. If the vinyl clings to the backing, slowly replace the 2 sheets back together and rub again, more firmly this time
Step 4: Gently place the vinyl in the position you would like to stick it. Again, rub firmly with your finger or a bank card to ensure good adhesion
Step 5: Slowly peel the clear transfer tape away at an angle. If the sticker pulls away from the surface with the transfer tape, stick back down and repeat Step 4 until completely adhered.